To complete our wine rack, we put two coats of a rich mahogany stain on all of the components before the final assembly.  We discovered that a paint brush worked better than a cloth or foam brush for applying the stain, and it was painted on in smooth strokes going along the grain. Once the […]

Now that the outer box frame is complete, the next step in our birch plywood and RevolutionPly® wine rack project is to construct the inside shelving that will hold wine bottles. Each of the inside pieces are measured and notched halfway through the panels, so that they will fit together forming an “x” shape.  Then […]

We have the pieces cut for the framing of our wine rack.  After lightly sanding the edges, we used screws, a hammer and a steel bar to achieve our desired distressed look.  This can be done by placing screws on a hard surface, in this case a cement floor, and set the cut pieces of […]