Archive for the ‘RevBead™’ Category

RevolutionPly® Decorative Birdhouses – Part II

Thursday, August 17th, 2017

To begin construction of the RevolutionPly® decorative birdhouse project, we are using both 1/4″ and 1/2″ RevolutionPly® panels.  The 1/2″ RevolutionPly® is better for use in framing the birdhouses to add greater stability, while the 1/4″ RevolutionPly® is best for the roof and trim pieces.  We decided to also incorporate our RevBead® Reversible Plywood Beadboard […]

Celebrate Spring Sign – Part III

Wednesday, May 3rd, 2017

To complete our spring sign project, we attached the wooden flags using craft glue and then painted the letters of spring on each flag.  Since the flags are all different pastel colors, we used white paint for the letters.  You could certainly purchase peel and stick letters to apply to the flags instead of painting […]

Celebrate Spring Sign – Part II

Wednesday, April 26th, 2017

In continuation of our spring sign project, it is time to start decorating.  Using white craft paint, welcome was painted across the top of the light gray RevBead® sign.  Each letter in spring is being painted a different color to represent the beautiful colors of the season.  For our sign, we are giving it the […]

Celebrate Spring Sign – Part I

Thursday, April 20th, 2017

A crafty way to welcome spring into your home is to display a decorative sign that will brighten an entryway or add color to accent a mantel. We are constructing our sign using RevBead® Reversible Plywood Beadboard, along with the following materials: Jigsaw or table saw Small nails Hammer Twine Craft paints Paint brushes Wood […]

RevBead® Menu Board – Part II

Friday, March 31st, 2017

In continuation of our RevBead® menu board project, black chalkboard paint was applied to one side of the cut RevBead® panel. The framing pieces were cut from a strip of trim moulding and lightly sanded on the edges.  We chose red as our frame color and two coats were applied.  Once dry, the painted pieces […]

RevBead® Menu Board

Friday, March 24th, 2017

A really fun and useful craft for display in your kitchen is a menu board constructed of RevBead® Reversible Plywood Beadboard. The supply list for this project consists of: – a piece of RevBead® Reversible Plywood Beadboard – jigsaw or table saw – nail or staple gun – small nails/staples – wood glue – trim […]

Star Place Holders

Thursday, December 29th, 2016

A crafty idea for making place holders for your holiday party is to cut and paint star shapes out of RevBead® plywood beadboard.  You will need a piece of RevBead® plywood beadboard, jigsaw, drill, star shape template, sand paper or block sander, craft paint, paint pen, and twine. Trace and cut the star shapes and […]

NAFCD + NBMDA 2016 Annual Convention

Wednesday, November 2nd, 2016

NAFCD (North American Association of Floor Covering Distribution) and NBMDA (North American Building Material Distribution Association) hosts the 2016 Annual Convention November 1 – 3 at the Hyatt Regency in Chicago, IL. This convention brings together top manufacturers and distributors to take part in education sessions, share information, learn about trends, and establish new relationships. […]

2016 NAWLA Traders Market is Here!

Wednesday, October 19th, 2016

Patriot Timber Products is a proud member of the North American Wholesale Lumber Association (NAWLA). We have a booth at the NAWLA Traders Market next week – October 26-28 at The Mirage in Las Vegas, NV. Stop by and see us at Booth #306 to learn more about our complete line of panel products including RevolutionPly® […]

Installation Recommendations for RevBead® Reversible Plywood Beadboard and PatriotBead™ Plywood Beadboard

Monday, October 17th, 2016

Panel Preparation: Care should be taken during handling and storage of panels in order to prevent damage to shiplap edges, face, or back. Acclimate in the installation environment for a minimum of 48 hours. Do not expose panels to direct weather or sunlight during the acclimation period. In order to minimize dimensional panel movement (shrinkage, […]

Back to Blog