3-D Picture Frame – Part III

Friday, April 13th, 2018

The next steps in completing the 3-D picture frame using cabinet grade and RevolutionPly® plywood are painting and preparing the frame for assembly.  We chose two shades of gray paint for our frame.  A light gray is used for the top component and a slightly darker shade is used for the bottom component.  The color […]

3-D Picture Frame – Part II

Friday, April 6th, 2018

In continuation of our project to create a 3-D picture frame using cabinet grade and RevolutionPly® plywood, all pieces have been cut out and lightly sanded to remove any splinters.  The next step is to use the router with a 1/2″ bit to outline each space that will hold a photograph, therefore making the openings […]

3-D Picture Frame – Part I

Thursday, March 29th, 2018

A great way to display photographs is in a beautiful 3-D frame constructed from cabinet grade plywood and RevolutionPly®.  Below is a list of materials needed to complete this fun project. We began by measuring and tracing the dimensions of our frame onto a piece of 1/2″ cabinet grade plywood.  This thickness makes a sturdy […]

Family Tree Collage Frame – Part IV

Friday, March 23rd, 2018

The final stage in completing the family tree collage frame is decorating it and adding photographs.  We decided to add some leaves to accent our tree shaped frame.  Using a Cricut, different shades of green leaves were printed and cut.  After arranging them in the desired pattern, modpodge was applied to attach the leaves to […]

Family Tree Collage Frame – Part III

Thursday, March 15th, 2018

In continuation of the family tree collage frame, we are now ready to add paint or stain.  We decided to use a dark wood stain for the front and a brown paint on the backside of our frame.  While the frame was drying, pieces of acrylic were measured and cut to fit the openings for […]

Family Tree Collage Frame – Part II

Friday, March 2nd, 2018

After carefully measuring and tracing the patterns for the needed cuts, a drill was used to outline the cuts as a guide for the jigsaw blade.  The edges of the cuts were lightly sanded to smooth the surface.  On the backside of the frame a router was used to trim a 1/2″ outline around each […]

Family Tree Collage Frame – Part I

Thursday, February 22nd, 2018

A beautiful way to display family photographs is in a family tree collage frame.  We are constructing one using cabinet grade and RevolutionPly® plywood.  Below is a list of materials needed to complete the project. The first step is to create the desired design for the collage frame and then trace it out onto the […]

THE INTERNATIONAL SURFACES EVENT 2018

Friday, January 12th, 2018

Patriot Timber Products will be exhibiting again this year at The International Surface Event (TISE) 2018.  The show will be in Las Vegas, Nevada this year from January 30th – February 1st at the Mandalay Bay Convention Center.  The International Surface Event (https://tisewest.com) consists of three world-class tradeshows – SURFACES / StonExpo/Marmomac / and Tile […]

HAPPY NEW YEAR!

Thursday, December 28th, 2017

The Patriot Timber Products family would like to wish everyone a safe, happy and prosperous 2018.

RevolutionPly® Decorative Birdhouses – Part VI

Wednesday, December 13th, 2017

The third in the series of four RevolutionPly® and RevBead® Reversible Plywood Beadboard decorative birdhouses is being decorated in a summer theme.  Thin strips of wood were added horizontally as shiplap siding to give the birdhouse a beach cottage look.  We then painted it a light blue and added a tin roof and antique decorative […]

Back to Blog